High-frequency high-acceleration vibration fatigue test of a blade

Solution design
1. Determine the first three natural frequencies, mode shape and damping ratio of the blade;
2. Determine the position of the maximum stress point at the first-order natural frequency of the blade;
3. Determine the fatigue strength limit and stress-life (S-N) curve of the blade.
 

Test purpose or requirement

The fatigue strength limit value and the stress-life (S-N) curve of a small blade were measured.

01

02

03

Equipment development test plan
Develop a high-frequency high-acceleration fatigue test system with a maximum frequency of 6000 Hz and a maximum

acceleration of 500 g.
 

Test implementation

1. Determine the first three natural frequencies, mode shapes and damping ratios by modal test;
2. Determine the maximum stress point position of the blade at the first-order natural frequency by the stress distribution test;
3. Using the high-frequency high-acceleration fatigue test system, the blade stress-life (S-N) curve is measured;

04

Test results

The fatigue strength limit and stress-life (S-N) curves of a small blade were successfully measured.

05